oh just cargo fmt it all

This commit is contained in:
2026-10-06 20:58:16 +01:00
parent 37a6496906
commit d154b1e376
17 changed files with 119 additions and 116 deletions
@@ -5,7 +5,9 @@ fn main() {
println!("Please insert a number between 2 and 45");
let mut num = String::new();
io::stdin().read_line( &mut num).expect("failed to read line");
io::stdin()
.read_line(&mut num)
.expect("failed to read line");
let num: u8 = match num.trim().parse() {
Ok(n) if n < 45 => n,
@@ -19,7 +21,6 @@ fn main() {
println!("{fib}");
}
fn fibonacci(n: u8) -> u32 {
if n == 0 {
0
@@ -15,60 +15,56 @@ fn main() {
// then the input should be sanitized and validated / parsed int.
loop {
println!("Type 1 for converting Celcius to Fahrenheit");
println!("Type 2 for converting Fahrenheit to Celcius");
println!("Type 1 for converting Celcius to Fahrenheit");
println!("Type 2 for converting Fahrenheit to Celcius");
let mut temp_type = String::new();
let mut degrees = String::new();
let mut temp_type = String::new();
let mut degrees = String::new();
io::stdin()
.read_line(&mut temp_type)
.expect("failed to read line");
io::stdin()
.read_line(&mut temp_type)
.expect("failed to read line");
let temp_type: u32 = match temp_type.trim().parse() {
Ok(num) if num == 1 || num == 2 => num,
Ok(_) => {
let temp_type: u32 = match temp_type.trim().parse() {
Ok(num) if num == 1 || num == 2 => num,
Ok(_) => {
println!("Please type 1 or 2");
continue;
}
Err(_) => {
println!("Please type 1 or 2");
continue;
Err(_) => {
println!("Please type 1 or 2");
continue;
}
};
};
// TODO USER INPUT 2
// next up, we need to get a new user input, as float. This must also be sanitized and parsed.
// Here we can perhaps come into some difficulties, what if the user inputs 22? not 22.0? also,
// we need to let the user input again, if the input is invalid, like text or whatever.
println!("Please enter the temperature: ");
// TODO USER INPUT 2
// next up, we need to get a new user input, as float. This must also be sanitized and parsed.
// Here we can perhaps come into some difficulties, what if the user inputs 22? not 22.0? also,
// we need to let the user input again, if the input is invalid, like text or whatever.
println!("Please enter the temperature: ");
io::stdin()
.read_line(&mut degrees)
.expect("failed to read line");
io::stdin()
.read_line(&mut degrees)
.expect("failed to read line");
let degrees: f64 = match degrees.trim().parse() {
let degrees: f64 = match degrees.trim().parse() {
Ok(num) => num,
Err(_) => continue,
};
// TODO CALCULATOR
// The control flow starts here. if user input 1 = 1 then convert from c to f. if user input =
// 2, then f to c. We could have a else to catch something unexpected. Say something like, an
// error occured when trying to convert temperature, please try again...
if temp_type == 1 {
let result = (degrees * 9.0/5.0) + 32.0;
// TODO CALCULATOR
// The control flow starts here. if user input 1 = 1 then convert from c to f. if user input =
// 2, then f to c. We could have a else to catch something unexpected. Say something like, an
// error occured when trying to convert temperature, please try again...
if temp_type == 1 {
let result = (degrees * 9.0 / 5.0) + 32.0;
println!("{degrees} celcius is {result:.2} fahrenheit");
} else if temp_type == 2 {
let result = (degrees - 32.0) * 5.0/9.0;
let result = (degrees - 32.0) * 5.0 / 9.0;
println!("{degrees} fahrenheit is {result:.2} celsius");
} else {
println!("something went wrong, please try again");
continue;
}
}
}
@@ -1,13 +1,23 @@
fn main() {
let gifts: [&str;12] = ["A partridge in a pear tree", "Two turtle doves and", "Three french hens ",
"Four calling birds", "Five golden rings", "Six geese a-laying", "Seven swans a-swimming",
"Eight maids a-milking", "Nine ladies dancing", "Ten lords a-leaping",
"Eleven pipers piping", "Twelve drummers drumming" ];
let gifts: [&str; 12] = [
"A partridge in a pear tree",
"Two turtle doves and",
"Three french hens ",
"Four calling birds",
"Five golden rings",
"Six geese a-laying",
"Seven swans a-swimming",
"Eight maids a-milking",
"Nine ladies dancing",
"Ten lords a-leaping",
"Eleven pipers piping",
"Twelve drummers drumming",
];
let mut s = String::from(gifts[0]);
for day in 1..13 {
let ending = if day == 1 {
let ending = if day == 1 {
"st"
} else if day == 2 {
"nd"
@@ -18,8 +28,8 @@ fn main() {
println!("{s}");
if day != 12 {
s.insert_str(0,"\n");
s.insert_str(0,gifts[day]);
s.insert_str(0, "\n");
s.insert_str(0, gifts[day]);
}
}
}
@@ -30,7 +30,7 @@ pub fn run() {
// You can also use if in a let statements, as such
let condition = true;
let number = if condition {5} else {6};
let number = if condition { 5 } else { 6 };
println!("The value of the conditional number is {number}");
// repitition with loops
@@ -55,7 +55,7 @@ pub fn run() {
// guess. Let's go slowly through this
let mut count = 0;
'counting_up: loop{
'counting_up: loop {
println!("count = {count}");
let mut remaining = 10;
@@ -99,5 +99,4 @@ pub fn run() {
println!("{number_for}");
}
println!("for loop LIFTOFF!!!");
}
+24 -10
View File
@@ -7,7 +7,6 @@ pub fn run() {
println!("delcared floats: \nvar x: {x} \nvar y: {y}");
println!("\n=== 2.2 numeric ops ===\n");
// addition
let sum = 5 + 10;
@@ -24,9 +23,9 @@ pub fn run() {
// remainder
let remainder = 43 % 5;
println!("5 + 10: {sum}\n95.5 - 4.3: {difference}\n4 * 30: {product}\n56.7 divided by 32.2: {quotient}\ntruncated -5 / 3: {truncated}\n43 % 5: {remainder}\n");
println!(
"5 + 10: {sum}\n95.5 - 4.3: {difference}\n4 * 30: {product}\n56.7 divided by 32.2: {quotient}\ntruncated -5 / 3: {truncated}\n43 % 5: {remainder}\n"
);
println!("\n=== 2.2 compound types ===\n");
println!("\n=== tuples ===\n");
@@ -55,15 +54,30 @@ pub fn run() {
let index_one = tup2.1;
let index_two = tup2.2;
println!("here are the tuple decustructed indexed values method: index zero: {}, index one: {}, index two: {}", index_zero, index_one, index_two);
println!(
"here are the tuple decustructed indexed values method: index zero: {}, index one: {}, index two: {}",
index_zero, index_one, index_two
);
println!("\n=== arrays ===\n");
// Arrays can only contain one type. Arrays in rust have a fixed length.
// syntax is as such: let a = [1,2,3,4,5];
// arrays live on the stack. only use if you always know the number of items in the array.
// Else, chances are you want to use vectors from the std lib. Vectors live in the heap. This is covered later in the book.
let months = ["January", "February", "March", "April", "May", "June", "July",
"August", "September", "October", "November", "December"];
let months = [
"January",
"February",
"March",
"April",
"May",
"June",
"July",
"August",
"September",
"October",
"November",
"December",
];
// you can initialize the array with type and length as such:
// let a: [i32;5] = [1,2,3,4,5];
@@ -73,9 +87,9 @@ pub fn run() {
let third_month = months[2];
let fifth_month = months[4];
println!("now we access the month array by index. The third month is {third_month}. The fifth month is {fifth_month}");
println!(
"now we access the month array by index. The third month is {third_month}. The fifth month is {fifth_month}"
);
// Note, the compiler will complain if you try to access a value that is outside the array
}
+2 -2
View File
@@ -1,7 +1,7 @@
mod variables;
mod control_flow;
mod data_types;
mod functions;
mod control_flow;
mod variables;
fn main() {
variables::run();
+1 -5
View File
@@ -6,8 +6,6 @@ enum IpAddrKind {
V6,
}
// One might try to use an enum and a struct to give it types, like this:
#[derive(Debug)]
struct IpAddr {
@@ -22,7 +20,6 @@ enum IpAddrConcise {
V6(String),
}
pub fn run() {
println!("\n=== defining enums ===\n");
route(IpAddrKind::V4);
@@ -49,9 +46,8 @@ pub fn run() {
println!("the home address is {home:#?}");
println!("the loopback address is {loopback:#?}");
}
fn route (ip_kind: IpAddrKind) {
fn route(ip_kind: IpAddrKind) {
println!("your ip kind is {ip_kind:#?}");
}
+1 -1
View File
@@ -3,7 +3,7 @@ use crate::match_control_flow::UsState::Alabama;
#[derive(Debug)]
enum UsState {
Alabama,
Alaska
Alaska,
}
// Her we define a basic enum
+1 -1
View File
@@ -53,7 +53,7 @@ fn main() {
Ordering::Less => println!("Too small!"),
Ordering::Greater => println!("Too big!"),
Ordering::Equal => {
println!("You win!");
println!("You win!");
break;
}
}
+3 -5
View File
@@ -17,14 +17,12 @@ pub fn run() {
// This is a string literal. This is hardcoded into the program at compile time.
{ // s is not valid here, since it has not been declared
let s = "hello"; // s is valid from this point onward
{
// s is not valid here, since it has not been declared
let s = "hello"; // s is valid from this point onward
println!("{s}");
// Do stuff with s
} // this scope is now over, and the variable s is no longer valid
// when s comes into scope, it is valid
// when s goes out of scope, it is invalid
}
+2 -4
View File
@@ -9,7 +9,6 @@ pub fn run() {
// Here is how you can use a variable as a reference to a parameter without taking ownership of
// it
// s is a reference to s1 which has a reference to an address in memory
let s1 = String::from("hello");
let len = calculate_length(&s1);
@@ -20,10 +19,10 @@ pub fn run() {
// At any given time, you can have either one mutable reference or any number of immutable references.
// References must always be valid.
}
fn calculate_length(s: &String) -> usize { // s is a reference to a string
fn calculate_length(s: &String) -> usize {
// s is a reference to a string
s.len()
} // Here, s goes out of scope. But because s does not have ownership of what it refers to
// The String is not dropped.
@@ -49,5 +48,4 @@ fn calculate_length(s: &String) -> usize { // s is a reference to a string
fn change(some_string: &mut String) {
some_string.push_str(", world!");
}
-1
View File
@@ -14,7 +14,6 @@ pub fn run() {
let f_word = first_word(&s);
println!("{f_word}");
let my_string = String::from("hello world");
// `first_word` works on slices of `String`s, whether partial or whole.
+18 -20
View File
@@ -1,14 +1,14 @@
#![allow(dead_code)]
#![allow(unused_variables)]
struct Color(i32, i32, i32);
struct Point(i32, i32, i32);
struct Color(i32, i32, i32);
struct Point(i32, i32, i32);
struct User {
active: bool,
username: String,
email: String,
sign_in_count: u64,
}
struct User {
active: bool,
username: String,
email: String,
sign_in_count: u64,
}
pub fn run() {
println!("\n=== defining and instantiating structs ===\n");
@@ -21,8 +21,6 @@ pub fn run() {
// structure.
// Here is an example of a user data structure.
let user1 = User {
active: true,
username: String::from("username123hello"),
@@ -35,25 +33,26 @@ pub fn run() {
let uemail = String::from("newemail@example.com");
println!("struct mut email: {uemail}");
let user2 = build_user(String::from("bartal.baek@example.com"), String::from("baraldur12345"));
let user2 = build_user(
String::from("bartal.baek@example.com"),
String::from("baraldur12345"),
);
let u2name = user2.username;
let u2email = user2.email;
println!("the name of user2 is {u2name}, and the email is {u2email}");
let update_user1 = User {
email: String::from("bxtal@example.com"),
..user1
};
email: String::from("bxtal@example.com"),
..user1
};
// TUPLE STRUCTS
// groupings of related values, where the tuple is named, but the values are unnamed.
let black = Color(0,0,0);
let origin = Point(0,0,0);
let black = Color(0, 0, 0);
let origin = Point(0, 0, 0);
let Point(x,y,z) = origin;
let Point(x, y, z) = origin;
println!("the y point is {y} and the x point is {x}, and the z point is {z}");
@@ -65,7 +64,6 @@ pub fn run() {
// OWNERSHIP OF STRUCT DATA
// Usage of lifetimes, in chap 10, no more explaination here.
}
fn build_user(email: String, username: String) -> User {
+1 -1
View File
@@ -1,6 +1,6 @@
mod defining_structs;
mod struct_program;
mod methods;
mod struct_program;
fn main() {
defining_structs::run();
+1 -4
View File
@@ -38,10 +38,7 @@ pub fn run() {
};
let sq = Rectangle::square(5);
println!(
"The area of the rectangle is {} square feet",
rect1.area()
);
println!("The area of the rectangle is {} square feet", rect1.area());
println!("The rectangle has a nonzero width, it is {}", rect1.width());
println!("Can rect1 hold rect2? {}", rect1.can_hold(&rect2));
+4 -7
View File
@@ -13,11 +13,11 @@ pub fn run() {
println!(
"The are of the rectangle is {} square pixels",
area(width1,height1)
area(width1, height1)
);
// program with struct tuple
let rect1 = (30,50);
let rect1 = (30, 50);
println!(
"The tuple struct rectancle is {} square pixels",
tuple_struct_area(rect1)
@@ -32,21 +32,18 @@ pub fn run() {
println!(
"The struct rectangle is {} square pixels",
struct_area(&rect2)
);
);
dbg!(&rect2);
println!("this is also debug for rect2\n{rect2:#?}");
println!("this is also debug but not as pretty with :? for rect2\n{rect2:?}");
}
fn area(width: u32, height: u32) -> u32 {
width * height
}
fn tuple_struct_area(dimensions: (u32,u32)) -> u32 {
fn tuple_struct_area(dimensions: (u32, u32)) -> u32 {
dimensions.0 * dimensions.1
}